Getting Started; Phone Installation - Doro ip810c Manual

Getting Started

Phone Installation

Install your phone using the "Quick Start Guide" included in the package:
Installation Step
Check contents of package
Attach the footstand for horizontal
placement
Connect the following components to
your phone
We recommend this order:
Adjust the display angle
Place the phone on an even, horizontal
surface. Do not place it on carpets or
other materials containing fibers that
could block the air vents and cause
overheating.
Note: The phone can be powered either from the network (PoE: IEEE 802.3
af) or from a 5-V DC power adapter. Only use the 5-V DC adapters (power
supplies) listed below or an adapter approved by your local reseller.
2
Not included in delivery
3
Optional component
User Manual - English
ip810c ip820c
1. Handset via handset cord
2. Network via Ethernet cable
3. Power supply
4. Optional: PC
5. Optional: Headset
6. Optional: Expansion module
Not applicable
Power Rating
10,5 W 90-264V AC / 5,25V DC
1 1
ip830c
factory factory
fitted fitted
2
via Ethernet cable
5 5
5, 3
5, 6
ip840c
factory
fitted