Pause Function; Load Sensing - Sensor Logic - AEG FAVORIT 43050 i User Instructions

Pause function

The pause function can only be initiated before the DRYING section of
3
the programme. If the pause function is initiated during the DRYING
section of the programme the wash programme is ended.
Using the pause function the dishwasher can be temporarily stopped:
0 1. Press the ON/OFF button. The wash programme will stop.
2. All indicators will go out.
3. After a short time when the wash programme is to continue, press the
ON/OFF button again. The wash programme will continue.
The wash programme should not be stopped for a prolonged period or
2
the cooled water will need to be reheated resulting in increased energy
consumption.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes
in the upper and/or lower rack, an intelligent electronic system adjusts
the amount of water and the duration of the wash programme to the
number of dishes. By this means it is possible to wash only a few dishes
quickly and economically. At half load (6 place settings), up to 2 litres
of water and 0.2 kWh of electricity are saved.
Operating Instructions
25