Prior To Using For The First Time; Adjusting The Water Softener - AEG FAVORIT 43050 i User Instructions

Operating Instructions

Prior to using for the first time

Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport.
Then perform the following steps:
1. Adjust the water softener
0
2. Filling with Special Salt for the Water Softener
3. Filling with Rinse Aid

Adjusting the Water Softener

To prevent the build up of scale on dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content water. For this
reason the dishwasher is fitted with a water softener in which tap
water from a hardness of 4 °d (German degree) is softened with the aid
of special salt.
Your local water authority can advise you on the hardness of the water
3
in the area where you live.
The water softener can be set to any of 5 settings:
1)
in °d
41 - 50
30 - 40
19 - 29
4 - 18
less than 4 less than 70
1)(°d) German degree, measure of the hardness of water
2)(PPM), Parts Per Million, international units of water hardness
*factory setting
10
Water Hardness
2)
in PPM Range
730 - 900
530 - 720
330 - 520 III/IV
70 - 320 I/II/III
Adjust
to Hardness Setting
IV 5
IV 4
3 *
2
1
I no salt
necessary
Number of
Flashes
5
4
3
2
1