50 cm 2
360 cm 2
PRODUCT DESCRIPTION
Cooking surface layout
2
1
Control knobs
Symbol
no gas supply / off position
ignition position / maximum
gas supply
OPERATION
Ignition of the burner
Warning! Be very careful when you
use open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
1. Turn the control knob counterclockwise
to the maximum position (
push it down.
2. Keep the control knob pushed for ap-
proximately 5 seconds; this will let ther-
mocouple to warm up. If not, the gas
supply will be interrupted.
120 cm 2
180 cm 2
3
4
5
6
Description
) and
MANUFACTURER:
ELECTROLUX ITALIA S.p.A.
C.so Lino Zanussi, 30
33080 PORCIA (PN) - ITALIA
1
Triple Crown burner
2
Semi-rapid burner
3
Semi-rapid burner
4
Semi-rapid burner
5
Auxiliary burner
6
Control knobs
Symbol
minimum gas supply
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
electrolux 7
Description
Need help?
Do you have a question about the EHT90830 and is the answer not in the manual?