Event Server Configuration; Ftp Server - Planet IVS-H120 User Manual

Name:
Object Size:
Sensitivity

3.13 Event Server Configuration

3.13.1 FTP Server

You may setup FTP parameters for further operation of Event Schedule. That's, if users want to
send the alarm message to an FTP server, it will need to configure parameters here and also add
at least one event schedule to enable event triggering as SMTP.
Name:
FTP Server:
Test:
Name of the specified motion window.
Defines the object size of motion detection. The higher object size will
only larger objects trigger motion detection. The lower object size will
even small objects trigger motion detection too. Generally speaking,
the smaller size will be easier to trigger event.
Defines the sensitivity value of motion detection. The higher value will
be more sensitivity.
User can specify multiple FTP paths as wish. Therefore, user
needs to specify a name for each FTP setting.
Type the server name or the IP address of the FTP server.
Check the FTP server whether this account is available or not.
63