Optional Devices
3. Close the lid and slide the lock to the lock position.
For details on inserting the Slim Select Bay HDD adaptor in the computer's
Slim Select Bay slot, refer to Chapter 4,
USB floppy disk drive
The USB floppy disk drive module can be connected to the USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports XGA and Super XGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
8-14
Basics.
Monitor cable
Connecting the monitor cable to the external monitor port
Closing the lid
Operating
External monitor port
Lid
Basics.
User's Manual