Toshiba TECRA M5 User Manual page 42

The Grand Tour
TOSHIBA
Presentation button
TOSHIBA Assist
button
Power button
LCD Sensor switch
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation Mode and shut down even if the Panel
Power Off feature is disabled.
2-10
Press this button to display the same image on
the internal and external monitor or to use
multi-monitor display (Windows XP Only).
The default setting is "Presentation (Same Image
1024x768)". The same image is displayed on the
internal and external monitor with screen
resolution 1024x768.
In the setting of "Presentation (Different Image)",
you can use the internal and external monitors as
a widescreen.
This setting is supported in Windows XP only.
Press this button again to change back to single
display mode on the internal LCD.
You can specify the function of the TOSHIBA
Presentation button in the TOSHIBA Controls
properties.
Press this button to launch a program. The
default is TOSHIBA Assist.
When the computer is in Standby or Hibernation
Mode or turned off, press this button to start the
computer and launch the program.
You can specify the function of the TOSHIBA
Assist button in the TOSIHBA Controls
properties.
Press the power button to turn the computer's
power on and off.
This switch senses when the computer's LCD
display panel is closed or opened and activates
the Panel Power Off/On feature. When you close
the LCD display panel the computer enters
Hibernation Mode and shuts down. When you
open the computer's LCD display panel the
computer starts in Hibernation Mode. Use the
TOSHIBA Power Saver Utility to enable or
disable this feature. The default is "enabled".
Refer to the TOSHIBA Power Saver Utility and
Panel Power Off/On items in Chapter 1,
features, for details on settings.
Special
User's Manual