Pro-Form 700 Lt Treadmill Manual page 13

10. Set the console assembly on the Left and Right
Handrails (71, 72). Make sure that no wires
are pinched. Insert the excess Upright Wire (70)
into the Left Handrail.
Attach the console assembly to the brackets on
the Handrails (71, 72) with two 5/16" x 1" Screws
(7) and two 5/16" Star Washers (8). Start both
Screws, and then tighten them.
11. Attach the two Console Clamps (34) to the con-
sole assembly with four #8 x 3/4" Screws (6).
See step 4. Tighten all six 3/8" x 4" Screws (4).
12. Identify the Left and Right Trays (45, 85). Orient
the Trays as shown and attach each Tray
with four #8 x 3/4" Screws (6). Start all of the
Screws, and then tighten them. Be careful not
to overtighten the Screws.
10
Console
Assembly
72
8
7
11
Console
Assembly
12
6
13
70
71
8
7
34
6
85
45
6
6
6