Grid Preparation; Reversing The Door - AEG SANTO Installation Instructions Manual

Grid preparation

When changing the side at which the door opens, remove plug from
the mains.
Left door opening:
Remove the left side (A) of the grid cutting
it from the rear (see figure)
Right door opening:
Remove the right side (B) of the grid cutting
it from the rear (see figure)
Re-install the grid to the base of the appli-
ance by pushing on to the clasps (a) until
they click.

Reversing the door

The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
To reverse the opening direc-
tion of the door, proceed as
shown in the figures:
DO002/2
1
2
1
A
B
a
a
4
5
3
29