Cd Operation; Inserting The Disc; Ejecting The Disc; Selecting A Track - Blaupunkt ACD 9850 Operating Instructions Manual

CD operation

Inserting the disc

• Turn on the radio.
• Insert the CD (label side facing up)
without applying force.
The disc is automatically pulled into the set to
reach the playback position. Then CD repro-
duction starts.

Ejecting the disc

• Press the / SRC button for more than
2 seconds. The disc will be ejected.
To protect the CD mechanism, the automatic
insertion or ejection of the disc must not be
impaired in any way.

Selecting a track

The activated CD functions will appear in the
display as soon as the disc is inserted.
Use the buttons to select the desired
title.
• = To skip titles.
= To repeat titles.
When pressing the button only once, CD
playback will start at the beginning of the
currently played track.
The rocker buttons have a sequence switch
function, i.e. several tracks can be skipped at
a time by pressing the corresponding button
repeatedly.
After the "T" (standing for "Track"), the
system shows the track number of the cur-
rently selected piece of music.
Fast forward (cue):
• Keep the rocker button
Fast backward (review):
• Keep the rocker button

The Mix function

When the Mix function is activated, all CD
titles will be played in random order. In this
case, "MIX" lights up in the display. To skip a
track, press the rocker button
To switch the Mix function on/off:
• Press MIX.
Changing the audio source with
SRC (source)
When a disc is inserted, you can use the
SRC button to shift between CD playback
and radio operation.
To switch over:
• Press / SRC briefly.

The Loudness function

When listening at a low level, the human ear
is less sensitive to the bass frequencies than
to the treble frequency range.
The Loudness function compensates for this
effect by emphasising the low frequencies at
reduced volume levels.
depressed.
Since the individual sensation of sound is
influenced by the type of system used (ampli-
depressed.
fier), the location and type of the employed
loudspeakers, and by the vehicle itself, the
Loudness threshold and the bass boost level
can be adjusted.
The bass boost level was adjusted at the
factory such that a natural sound impression
is obtained over a wide frequency range.
.
However, you may also alter the Loudness
setting. In this case, proceed as follows:
• Press the LD/AUD button until "LOUD"
and the adjusted value appear in the
display (you find this item after "LOUD
ON" / "LOUD OFF").
• Use the
/
boost. "1" corresponds to the lowest,
"6" to the highest efficiency level.
The last adjustment will be stored automati-
cally.
If the setting remains unchanged within 8
seconds, the display will switch back to the
previous condition.
buttons to adjust the bass
25