Table of Contents
Advertisement
22 www.aeg.com
1
3
2
WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power sock-
et.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natu-
ral fitting of the gasket.
2
4
3
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3) the cover
plate (2) and the hinge (1). Install the
cover (4) on the opposite side.
• Unscrew the lower hinge (1). Move the
pin to the opposite side (2).
• Unscrew and move the pedal to the op-
1
posite side (3).
• Screw on the lower hinge on the oppo-
site side.
• Tighten the pin with the adjustment
spanner supplied.
• Install the handle on the opposite side.
• Raise the appliance and install the ven-
tilation grille.
• Put the cabinet in position.
Advertisement
Table of Contents
