Nokia 500 Service Manual page 13

7) Use the SRT-6 to release the three clips on the left
side of the device.
9) Open also the three clips on the right side of the
device with the SRT-6. Be careful not to damage the
side switches on the ENGINE BOARD.
11) Use the AV plug to remove the AV JACK.
13
8) Open the two clips on the top side of the device
with the SRT-6.
10) The C-COVER can now be separated.
12) Use the DC plug to remove the DC JACK. Be careful
not to damage the gasket around the DC JACK.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia 500 (RM-750)
L1L2 Service Manual
Version 1.0