Electrolux EGG 9363 User Manual page 12

12 www.electrolux.com
E
A) Green and Yellow
B) 3 amp fuse
C) Brown
D) Cord clamp
E)
Blue
Should you need to replace the plug for
any reason, the wires in the mains lead
are coloured in accordance with the fol-
lowing code:
Green and yellow
Blue
Brown
1.
Connect the green and yellow (earth)
wire to the terminal in the plug which
is marked with the letter 'E' or the
earth symbol
and yellow.
2. Connect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter 'N' or coloured black.
3. Connect the brown (live) wire to the
terminal in the plug which is marked
with the letter 'L' or coloured red.
There must be no cut or stray strands of
wire present. The cord clamp must be
correctly attached on the outer sheath.
WARNING!
Make sure that the cut off plug is
disposed of safely. A cut off plug
put into a 13 amp socket is a
safety hazard. There is a risk of
electrical shock.
A B
- Earth
- Neutral
- Live
, or coloured green
The current regulations let only a
qualified electrician or a compe-
tent person to replace the mains
cable. Do not try to replace it if
you are not qualified to do that.
7.6 Replacement of the
connection cable
C
To replace the connection cable use only
H05V2V2-F T90 or equivalent type. Make
D
sure that the cable section is applicable to
the voltage and the working temperature.
The yellow/green earth wire must be ap-
proximately 2 cm longer than the brown
(or black) phase wire.
7.7 Building In
min. 45 mm
10 mm
A) supplied seal
B)
supplied brackets
min. 600 mm
min. 450 mm
min. 650 mm
30 mm
830 mm
3 mm
27 mm
B
A
27 mm
A