Honda CRF250R Owner's Manual & Competition Handbook page 108

250R_097-119.qxd 2008.07.17 15:42 ページ102
Front Suspension Adjustments
21.Push out the fork center bolt (25) from the
axle holder (22) of the slider by pushing the
fork damper. While the fork center bolt is
pushed out, install the piston base (26) or a
mechanic's stopper tool between the axle
holder and lock nut (27).
22.Hold the lock nut and remove the centre bolt
(25) from the fork damper.
NOTICE
Do not remove the lock nut from the fork damper
piston rod. If the lock nut is removed, the piston
rod will fall in the fork damper and you can not
reassemble the fork damper.
(26)
(22)
(27)
(25)
(22) axle holder (26) piston base
(25) centre bolt (27) lock nut
23.Remove the push rod (28) from the fork
damper.
24.Remove the piston base or mechanic's stopper
tool between the axle holder and lock nut (27)
while applying pressure to the fork damper.
NOTICE
Be careful not to damage the lock nut and fork
centre bolt hole.
102
Adjustments for Competition
(28)
(27)
(27) lock nut (28) push rod
25.Remove the fork damper assembly (29) from
the fork assembly (30).
Remove the fork from the vise.
Remove the fork spring (31) from the fork.
(29)
(31)
(30)
(29) fork damper assembly (31) fork spring
(30) fork assembly
Damper Oil Change
1. Set the fork damper (1) in a vise with a piece
of wood or soft jaws to avoid damage.
2. Loosen the fork cap assembly (2) while
holding the fork damper using the lock nut
wrench (3).
(1)
(2)
(3)
(1) fork damper (3) lock nut wrench
(2) fork cap assembly