Starting A Programme - AEG FAVORIT 86470 I User Information

Starting a programme

1. Check that the dishes and cutlery are stacked in the dishwasher in
such a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Close the door.
4. Press the ON/OFF button.
5. Select the desired programme.
The programme indicator and the respective stages of the
programme sequence indicators will be illuminated. The remaining
time expected for the programme will be shown in the multi-
display.
The selected programme will begin after approximately 2 seconds.
The current stage of the programme is always shown by the
programme sequence indicators.
During the programme, the remaining time shown in the multi-
display may be adjusted according to the size of the load, degree of
soiling, etc.
Interrupting or cancelling a programme
Only interrupt a programme that is in progress if it is
absolutely necessary.
Interrupting the wash programme by opening the dishwasher door
Hot steam may escape when the door is opened. There is a risk of
scalding.
1. Open the door carefully. The programme will stop.
2. Close the door. The programme will continue.
Cancelling the programme
1. Press function buttons 1 and 2 for approx. 2 seconds and keep them
pressed. The programme display for the current programme will flash
for several seconds and then go out.
2. Release the function buttons.
The programme has been cancelled.
3. If you want to start a new programme, check whether there is any
detergent in the dispenser.
Turning off the dishwasher will only interrupt a selected
programme, not cancel it. The programme will recommence after
turning the dishwasher back on again.
Operating instructions
19