Electrical Connection - AEG FAVORIT 86470 I User Information

Installation and connection instructions
Anti-flood system
For protection from water demage, the dishwasher is equipped with a
anti-flood sytem.
In the event of a fault, the safety valve in the water inlet hose
immediately interrupts the supply of water to the appliance.

Electrical connection

Details about the voltage, type of supply and the fuses required are to
be found on the rating plate. The rating plate is located on the right
inner edge of the dishwasher door.
To isolate the dishwasher from the mains, pull out the mains plug.
Important:
– The plug must still be accessible after the appliance has
been installed.
– Following installation, live parts and insulated wiring must not be
accessible with a probe in accordance with EN 60335/DIN.
Connections
The water inlet hose, drain hose and the mains cable must all be
connected to the side of the dishwasher as there is no space for them
behind the appliance.
32