--
CARE AND MAINTENANCE
The working life of your detector will be shortened by
careless use or neglect of the unit. Think of your C-Scope
as a scientific instrument - NOT A TOY. C-Scopes are
designed to withstand rugged handling on any terrain, but
mis-use or lack of due attention will tell in the end.
After using your detector in a hostile environment (salt
water, sand, etc.) the exterior parts of the casing should
be flushed with clean water, paying particular attention to
the head, and carefully wiped clean. Foreign particles in
the control box can be removed by brushing carefully (or
with compressed air or vacuum cleaner).
The life of controls may be extended by periodic (100 hours
of use) application of small quantities of light lubricant to
the spindles, threads and knob grub screws ('3 in l' or
similar household oil is suitable). This operation requires
the knobs to be removed.
Light packing grease should be smeared on the threads of
the locking collar, and at the same time, the head fixing
bolt. Do not store the detector in a damp place.
If these suggestions are followed your detector will give
you many years of efficient use.
-
IN THE EVENT OF A FAULT
All faults or queries must be notified direct to C-Scope
Metal Detectors (U K) Li mited, at Candle International House,
Wotton Road, Kingsnorth Industrial Estate, Ashford, Kent,
TN232LW.
If there are any problems quote the serial number on your
copy of the guarantee form or inside the control box, and
write to the above address or telephone Ashtord 291 1.
Please state as clearly as possible the nature of the problem.
Please do not send faulty detectors back to the retailer. Please
send them direct to C-Scope with an explanatory letter.
Please check thoroughly with these operating instruCtions
before sending your instrument back, particularly ensuring
that the batteries are not simply run down.
C-SCOPE REPAI R CONTRACT
C-Scope have the reputation for providing the treasure
hunter with a quality metal detector and a first class after
sales service.
The guarantee given with a C-Scope metal detector is one
of no-quibble. All faults which occur within the first year
of purchase are repaired free of charge provided that the
machine has not been grossly mis-used.
However, should a fault occur after the guarantee has
lapsed, expensive repairs may be necessary. For a small
yearly premium, your detector will be repaired free of
charge -
all you pay is the cost of postage. (see guarantee
car·d).
IMPORTANT NOTICES
Following the one year guarantee period, C-Scope will
correct all normal detector wear and failures at factory
cost, plus shipping. A service charge of £2.50 plus shipping
costs, will be made on any instrument that is sent to the
factory and needs ON L Y a battery. Please check your
detector thoroughly before sending it in.
C-Scope is continuously improving its products. Because
of this, we resefve the right to make changes at any time.
If you receive an instrument that has some feature that is
slightly different from what is shown in the brochures that
you have seen, or if a switch or control is relocated, etc.,
rest assured that this_change is.an imProvement.
You may sell or trade your detector with the full assurance
that the guarantee will continue for a full year after the
original purchase, regardless of who owns the instrument.
6
Need help?
Do you have a question about the VLF 1000 and is the answer not in the manual?