Fitting The Hob Into The Worktop - AEG Electrolux 75580G-M Instruction Booklet

Fitting the Hob into the Worktop

Carry out the building in of the hob as follows:
1) Remove the pan supports, the burners caps and
crowns and turn the hob upside down, taking
care the ignition candles are not damaged in
this operation.
2) Place the relevant sealing all around the glass
top edge, taking care that the sealings meet
without overlapping (Fig. 4).
3) Place the hob in the cut out, taking care of its
centring.
4) Fix the hob with the relevant fixing clamps,
supplied with the accessories bag (Fig. 5).
When the screws have been tightened, the excess seal
can be removed.
The edge of the hob forms a double seal which prevents
the ingress of liquids.
a)
sealing
17
Fig. 4
a
Fig. 5