Operating The Hob; Touch Control Sensor Field; Switching On The Appliance - AEG Electrolux 79301 KF-N Installation And Operating Instructions Manual

Operating the hob

Touch Control Sensor Field

To operate the Touch Control sensor field place your finger from above
flat onto the required field until the appropriate displays come on or go
out or the required function is carried out.

Switching on the appliance

The entire appliance is switched on using the "On/Off" sensor panel
I.
Touch the "On/Off" sensor panel for approx. two seconds.
The digital displays will show ¾.
3
After the "On/Off" sensor panel has been actuated to switch on your
appliance, a cooking setting must be selected for a cooking zone within
approx. 10 seconds, or a time must be set using the timer (egg timer
function). If not, the appliance will switch itself off again for reasons
related to safety.
38