Cooking Without The Automatic Warm Up Function - AEG Electrolux 79301 KF-N Installation And Operating Instructions Manual

1. Touch the heat setting selector sensor panel
setting from ¿ to Æ. The heat setting that has been set will then be
displayed. After a period of 5 seconds, the a (=automatic warm up
function) will appear in the display in place of the heat setting. After
the warm up period has finished, the heat setting will once more be
displayed.
3
If you should choose a higher heat setting while the automatic func-
tion is in operation, e.g. from Á to Ã, the period of time that the warm
up function is in operation will be adjusted accordingly. If you select a
lower setting, the warm up period will end immediately.
You can cook using the automatic warm up function only if the cook-
ing zone is cold or moderately warm. If a cooking zone is already hot
when you switch it on (h indicator), the automatic warm up function
cannot be used.

Cooking without the automatic warm up function

If you wish to use the cooking zones without the automatic warm up
function, select the desired heat setting using the heat setting selector
sensor panel
1. Touch the heat setting selector sensor panel
sired heat setting from Ç to ¿.
3
You can change the setting at any time using the heat setting selector
sensor panels
44
.
and .
to set the desired heat
in order to set the de-