Yamaha RX-V663 Owner's Manual page 28

Connections
■ Using REMOTE IN/OUT jacks
When the components are the Yamaha products and have
the capability of the transmission of the remote control
signals, connect the REMOTE IN jack and REMOTE
OUT jack to the remote control input and output jack with
the monaural analog mini cable as follows.
Remote
control out
Infrared signal
receiver or Yamaha
component
y
• If the components have the capability of the SCENE control
signals, this unit can automatically activate the corresponding
components and start the playback when you use one of the
SCENE buttons. Refer to the owner's manuals for details about
the capability of the SCENE control signals of the components.
• If the component connected to the REMOTE OUT jack is not
the Yamaha product, set "SCENE IR" in the advanced setup
menu to "OFF" (see page 97).
26
En
GND
FM
75Ω
UNBAL.
REMOTE TRIGGER
OUT
+12V
IN OUT 15mA MAX.
Remote
control in
Yamaha component
(CD or DVD player,
etc.)
Using the VIDEO AUX jacks on the
front panel
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit.
Caution
Be sure to turn down the volume of this unit and other
components before making connections.
Notes
• The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
• To reproduce the source signals input at these jacks, select
"V-AUX" as the input source.
EDIT
SPEAKERS SEARCH MODE BAND A/B/C/D/E
1
PROGRAM
MAIN ZONE
PHONES
SYSTEM OFF TONE CONTROL STRAIGHT
ON/OFF
SILENT CINEMA
EFFECT
S VIDEO VIDEO
S
Game console or
video camera
indicates recommended connections
indicates alternative connections
(One for the video connection,
and one for the audio connection)
VOLUME
ZONE 2 ZONE
PRESET/TUNING MEMORY INFO ON/OFF CONTROL
SCENE
2 3 4
INPUT
VIDEO AUX
PURE DIRECT AUDIO SELECT OPTIMIZER MIC
S VIDEO VIDEO L AUDIO
L AUDIO R OPTICAL
V O
L R
R OPTICAL