Blaupunkt MIAMI DJ Operating Instructions Manual page 7

Radio / cassette / changer
Table of Contents

Advertisement

8 AF
Alternative frequency during RDS op-
eration:
When "AF" lights up in the display, the
system will automatically seek a fre-
quency offering better reception of the
same RDS programme.
AF on/off: Press AF briefly.
Regional function on/off:
Press the AF button for approximately
1 sec. until you hear a beep.
"REG ON" or "REG OFF" will appear in
the display (see chapter REG - region-
al programme).
9 TA (priority for traffic announcements)
When "TA" lights up in the display, the
system will play traffic stations only.
Priority on/off: Press TA.
: 1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations for each of
the memory banks I, II, T, M and L.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play after
the muting and you hear a beep.
32
To recall a station: Select the desired
memory bank and press the relevant
preset button briefly.
Extra function of preset buttons
To store and recall a PTY programme
type.
When PTY is active ("PTY" lights up in
the display), you can store and recall
one programme type on/from each
preset button on FM.
; SRC (Source)
You can switch between the different
audio sources radio, cassette and CD-
changer when a tape is inserted and a
CD-changer hooked up.
<
/ lo
Radio operation
To switch the seek tuning sensitivity
level:
Press button briefly.
If "lo" is displayed, the radio will only
pick up strong, local stations (normal
sensitivity).
If "lo" does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).
Extra function of lo button:
To switch between mono and stereo
reception:
Press button for approximately 1 sec.
(beep).
The selected condition will be briefly
displayed.
Tape operation
Dolby B NR*
Press this button to play back a tape
which has been recorded with Dolby-B
noise reduction. When this button is
pressed, "B" lights up in the display.
* Noise Reduction system manufactured under li-
cense from Dolby Laboratories Licensing Cor-
poration.
"Dolby" and the double-D symbol are trademarks
of Dolby Laboratories Licensing Corporation.
=
/
To switch the tape side: Press briefly.
To eject the tape: Press for approxi-
mately 1 sec.
Extra function
/
Frequency display during radio opera-
tion:
Press button briefly.
The frequency will be briefly displayed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents