Abit AMD ATHLON KV8 PRO User Manual page 43

BIOS Setup
AGP Fast Write:
Two options are available: Disabled
support this function, then you can choose Enabled. Otherwise, choose Disabled.
AGP Master 1 WS Write:
Two options are available: Disabled
single delay when writing to the AGP Bus. When you set it to Enabled, two-wait states are used by the
system, allowing for greater stability.
AGP Master 1 WS Read:
Two options are available: Disabled
single delay when reading to the AGP Bus. When you set it to Enabled, two-wait states are used by the
system, allowing for greater stability.
AGP 3.0 Calibration cycle:
Leave this item to its default setting.
DBI Output for AGP Trans.:
Leave this item to its default setting.
Back to Advanced Chipset Features Setup Menu:
DRAM Configuration:
Click <Enter> key to enter its submenu:
Current FSB Frequency:
This item will show you the current system front side bus speed.
Current DRAM Frequency:
This item will show you the current DRAM bus speed.
Enabled. The default setting is Enabled. If your AGP adapter can
Enabled. The default setting is Disabled. This implements a
Enabled. The default setting is Disabled. This implements a
3-15
User's Manual