Rf Connections - Crown FM30 User Manual

2.5 RF Connections

Connect the RF load, an antenna or the input of an external power amplifier, to the type-N,
RF output connector on the rear panel. VSWR should be 1.5:1 or better.
The RF monitor is intended primarily for a modulation monitor connection. Information
gained through this connection can supplement that which is available on the transmitter
front panel displays.
If your transmitter is equipped with the receiver option, connect the incoming RF to the RF
IN connector.
Illustration 2–13 RF Connections
2-12 FM30/FM150/FM300 User's Manual