Fuses - Crown FM30 User Manual

2.2.2 Fuses

The fuse holders are located in the power connector assembly just below the voltage selec-
tor.
For 100 to 120 VAC operation, use the fuse installed at the factory. For 220 to 240 VAC op-
eration, use the slow-blow fuse located in a hardware kit within the transmitter packaging.
Consult the following table:
2-4
Illustration 2–3 Fuse Holder
Transmitter Input Power
FM30
FM150
FM300
Illustration 2–4 Fuse Reference Table
100–120 V
220–240 V
100–120 V
220–240 V
100–120 V 12.5 A
220–240 V
Fuse
3 A
1.5 A
6.3 A
4 A
6.3 A
FM30/FM150/FM300 User's Manual