Chapter Three: Ie Log-In Basic Operation - Digital ID View IP Camera User Manual

Remark: keys in grey means do not support
3.1 Boot
Connect to power, then IPC is auto boot.
Remark：1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V± 10% /50Hz.
Suggest using the UPS to protect the power supply under allowable conditions.
3.2 Reboot
Reboot IPC is divided into soft reboot and hard reboot. Soft switch please enter【Devicecfg】>
【Advanced】 choose【reboot】 ；Hard reboot, to cut off power and reconnect it to reboot device
Illustrate：
1、Power-off & recover function
If IPC happens with abnormal shut down when it is under recording, after reboot, it will
auto-save the record info before shutdown and restore to status before shutdown.
2、Change TF card
When change TF card, please cut off power supply firstly.
3、Change battery
IPC is using button cell battery, need regularly check system time, if time is not accurate, then
need to change battery. Suggest to change it once a year by professional maintainer and using
the same model of battery.
3.3 Log-in
When device turns on normally, need to log-in before operation, system will base on the authority of

Chapter Three: IE log-in basic operation

12000 Ford Road, Suite 110
Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291
www.idview.com
7