Digital ID View IP Camera User Manual page 46

【IR_CUT】can choose automatically switch or IR synchronous switch, default is automatically
switch
【Mirror image】tick
【Over turn】tick
【Anti-flicker】tick
【Front-end Command】fill in command and send out, front end of IP camera will carry out this
command
4.5 Advanced
Advanced menu including：HDD manage、Account、Auto Maintain、Default、Import & Export、
Upgrade、Reboot
4.5.1 HDD manage
To configure TF card that installed in device. Menu shows the information of current TF card,
including: type, status, total capacity. Operation to TF card including: set Read/Write, Read only,
Redundant, Format disk, Recover, Partition, etc. Select the TF card, then click function button on the
right side.
Remark：Read/Write：can read data and also can write data into it；
Read only：only can read data from the disk, but can not write data into it.
，means enable the convert of left and right of monitoring page
，means enable the convert of up and down of monitoring page.
，enable anti-flicker to the fluorescent light.
12000 Ford Road, Suite 110
Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291
www.idview.com
46