1. Manuals
  2. Brands
  3. Digital ID View Manuals
  4. IP Camera
  5. IP Camera
  6. User manual

Digital ID View IP Camera User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
IP Camera
（Network Camera）

User Manual

12000 Ford Road, Suite 110
Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291
www.idview.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP Camera and is the answer not in the manual?

Questions and answers

Related Manuals for Digital ID View IP Camera

Summary of Contents for Digital ID View IP Camera

  • Page 1: Network Camera

    IP Camera （Network Camera） User Manual 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...

  • Page 2: Important Safeguards And Warnings

    Use within the rating input and output scope. Suitable products： This manual is suitable for all series of IP Camera from our company, including indoor box type, IR waterproof type, whelk type, dome type, home-use robot type, etc. Special announcement：...

  • Page 3: Chapter One: Product Introduction

    Catalogue Chapter One: Product introduction 1.1 Product summary The IP cameras can be applied as a part of a safety surveillance network. With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability. And IPC can individually work also. The series DVR is designed specially for security and defense field which is an outstanding digital surveillance product.
  • Page 4 · with analog output interface can do surveillance through device of monitor or DVR, etc. Storage · Max support TF card with 32G (part of model support) for local storage of snapshot image. · can do snapshot remote storage via CMS software or Myeye platform ·...

  • Page 5: Chapter Two: Open Case Checking And Cable Connection

    Chapter Two: Open case checking and cable connection 2.1 Open case checking When you receive this product, Firstly, check model No. on product is the same as what you ordered； Then, check if there is obvious damage on packing; the protective material used for packing can afford most unexpected strike during transportation；...

  • Page 6: Video Output Connection

    2.4 Video output connection 2.4.1 choose and connect video output device 1.BNC output： ，75Ω)，can be connected to monitor or BNC video output is divided into: PAL/NTSC BNC(1.0V surveillance integrated equipment such as DVR, etc. BNC output can support preview of the monitor image only. Make sure the stable and reliable of transmission link：...

  • Page 7: Chapter Three: Ie Log-In Basic Operation

    Chapter Three: IE log-in basic operation Remark: keys in grey means do not support 3.1 Boot Connect to power, then IPC is auto boot. Remark：1. Make sure that the input voltage corresponds with the switch of the DVR power supply. 2.
  • Page 8 log-in user to provide related function. Default IP address：192.168.1.10，subnet mask：255.255.255.0，gateway：192.168.1.1 When device ex-fty, there are 3 preset users : admin、guest、default，default password is none, admin is preset as super authority user, guest and default is preset with authority of preview and playback, admin and guest user can modify password but not authority, default is the user default log-in, can modify authority but not password Pic : 3.1 Log-in...

  • Page 9: Setting Menu

    At preview page, can shows date, time and channel titile. 3.5 Setting menu ，will come out window as pic:3.3. setting menu On preview mode, click at top side , function including: Record, Alarm, System, Advanced, Info. Click icon bottom side will enter related next menu of this function.
  • Page 10 Pic: 3.4 Record setting Pic: 3.5 Snapshot setting 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 11 3.5.2 Playback To play the video file in TF card, can click at upper left side on monitor page, to enter video playback page. Remark: Device normal playback, the TF card that used for video storage should be set as read/write or read only (please refer to HDD manage).
  • Page 12 Previous frame Next frame Stop Chart 3.1 playback control button list Remark：Playback by frame should under the status of playback pause. 【Operate tips】to show the button function when cursor point it Special feature： Partial enlargement：when single view full screen playback, can use right button to choose any size of area from the image, click left button in the chosen area, can enlarge this area to playback, double click left button will exit.
  • Page 13 Pic: 3.7 Color setting 3.6 Log Show alarm information and operation record, if u tick at lower left side, when alarm happens, window tip will auto come out. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 14 Pic: 3.8 Log information 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...

  • Page 15: Chapter Four: Main Menu

    Chapter Four: Main Menu 4.1 Main menu guideline Main Menu Submenu Function summary Record Set record config, record type, record period, etc. Record Snapshot Set snapshot period, type , etc. Set motion detect alarm channel, sensitivity, area, linkage Video parameters: alarm output, snapshot, recording, PTZ, email motion sending, ftp upload, etc.
  • Page 16 Set encode mode: encode mode, resolution, frame rate, bit Encode rate, image quality, code stream value, I frame interval parameter, video/audio enable. Set basic net parameter, and DHCP 、DNS parameter ， Network auto-gain IP address, network high-speed download, net transmission tactics ARSP、...
  • Page 17 Import & Config import, Config export, Log export Export Upgrade To do net upgrade via IE or client software Reboot IPC soft reboot HDD info Show ttl space of HDD, type, space left, record time, etc Can base on record type and time to search log, can clear the Info log information Version...
  • Page 18 Pic: 4.1 Record setting 【Length】to set the length of each recording file between 1-120min, default is 60min； 【PreRecord】 to record 1-30s before motion happens (time length may slight different due to bit rate) 【Record control】set recode type: timing, manual & stop Timing: Record according to the set video type (regular, detect and alarm)and time period.
  • Page 19 file type is “M”. Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “A”. Remark：related alarm setting, please refer to chapter 4.3 alarm part. 4.2.2 Snapshot storage Setup snapshot parameters for different channels.At first time it's set for 24hours snapshot continuously, pls go to Main Menu->Record->Snapshot Storage for appropriate settings.
  • Page 20 Manual: No matter what is the current status, once choose "manual" ,it will have snapshot at related channels. Stop: No matter what is the current status, once choose "stop", it will stop snapshot at related channels. 【Period】Set normal record period, it only startup Snapshot Storage at set period. 【Type】Three types: regular, detect and alarm 【Record type】Three types: regular, detect and alarm Regular: snapshot at set period...
  • Page 21 Pic 4.3 Alarm function 4.3.1 Motion detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm and the linkage function is enable. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 22 Pic: 4.4 motion detect setting interface 【Enable】 means enable motion detect function, enable it firstly then can do related setting. 【Sensitivity】base on sensitivity, can set 6 grades: ，the higher of sensitivity to the moving ； objects, the easier to sense the motion happens 【Region】...
  • Page 23 Pic: 4.5 region setting 【Period】Trigger the motion detect signal in the set time section, see pic:4.6. You can set according to week or set uniformly. Each day is divided into four time sections.tick , mean setting is valid. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 24 Pic 4.6 Time Period setting 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval 0-600s. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.； 【Delay】Delay a few moments and stop when the alarm state is turned off.
  • Page 25 Pic: 4.7 PTZ linkage 【Delay】When alarm is over,recording will last some seconds(10~300sec),then stop.； 【EMAIL sending】tick ，means when alarm happens link email sending to inform user. Remark：sending email, need to do related setting at【Net service】. 【FTP upload】tick ，means when alarm happens, if record or snapshot channel was chosen, the record file and snapshot image will be uploaded to the appointed position.
  • Page 26 Pic: 4.8 video blind Setting detail : refer to chapter 4.3.1 motion detect. 4.3.3 Video lost When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is enable. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 27 Pic: 4.9 Video lost Setting detail: refer to chapter 4.3.1 motion detect. 4.3.4 Abnormal Analyze and detect the software and hardware of current device, when abnormal issue was detected, device will make related respondence. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 28 Pic: 4.10 abnormal 【Event type】choose event type at drop-down box, 【Enable】tick to enable，open abnormal deal function, setting is valid only if it is enable. 4.4 System setting To set parameter of all kinds of functions, setting including: General、Encode、Network、Net service、GUI display、PTZ config/RS485、RS232、Camera parameter. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 29 4.4.1 General setting Pic: 4.11 General setting 【System time】set current date and time of IP Camera. 【 Date format 】 choose date showing format, including ： year/month/date 、 month/date/year, date/month/year, 【Date separator】Choose list separator of the data format, 【Time format】choose time format, including: 24-hour and 12 hour；...
  • Page 30 【DST】 Tick DST, then click 【setting】, will come out window as pic: 4.12 & pic:4.13, to set the start time and end time of summertime via week or date. Pic:4.12 DST (Week) setting Pic:4.13 DST(Date) setting 4.4.2 Encode Seting Set video/audio encode parameters, including image parameters of record file, remote monitor, etc. Left part is to set the encode parameter of each separated channel, right part is to set encode parameter of extra stream, dual stream is using one high bit rate stream for local high definition storage, support D1/HD1/CIF/QCIF encode, one low bit rate stream(QCIF encode) for net transmission, in order to...
  • Page 31 Pic: 4.14 Encode setting Encode setting 【Compression】Standard H.264MP； 【Resolution】show types of resolution: D1/HD1/CIF/QCIF； 【Frame rate】adjustable, real-time standard is： PAL，25 fps NTSC，30 fps； 【Bit rate type】you can choose CBR or VBR, image quality have 6 grades to choose under VBR type, then you can manual choose the bit rate value under CBR type. 【Image quality】set bit rate value to change the image quality, if supporting facility is available, the larger of bit rate value, the better of image quality.
  • Page 32 【audio/video】the icon was all ticked, means audio & video combine stream 4.4.3 Network setting Pic: 4.15 Network setting 【Net card】you can choose wired net card； 【DHCP enable】to auto get IP address(not suggested)； Remark：need to set up DHCP server in advanced.。 【IP address】set IP address of device, default IP address is：...
  • Page 33 【TCP port】default is 34567； 【HTTP port】default is 80； 【high speed download】Network high speed download； 【Transfer policy】there are 3 policies, adaptive, quality preferred, fluency preferred. Base on different setting, code stream is auto-adjusted, adaptive is eclectic between quality and fluency, also considers fluency when the quality is not greatly influenced.
  • Page 34 Pic: 4.17 PPPOE Enabe：Tick means chosen, enable it firstly, then the setting is valid Input user name and password that provided by ISP（Internet server provider）, save it and reboot device, after reboot, IPC will auto connect to network by the way of PPPoE, if it is successful【IP address】will be changed to the dynamic WAN IP that just get.
  • Page 35 GMT-10 Alaska GMT-9 Pacific time GMT-8 US mountain time GMT-7 US central time GMT-6 US eastern time GMT-5 Atlantic time GMT-4 Brazil GMT-3 Atlantic central GMT-2； Update period：The same with the NTP server check interval. Default: 10minutes 【EMAIL setting】 EMAIL sending is used for sending alarm information and snapshot picture to appointed mailbox when alarm link to snapshot.
  • Page 36 When choose the white list, only the IP in the list can connect to IP camera, list can support 64 IP setting； When choose the black list, mean the IP in the list can not access IP camera via net, list can support 64 IP setting.
  • Page 37 Pic: 4.22 DDNS setting To analyze server via dynamic domain name, choose DDNS type Host domain name：Provide the domain name registered by DDNS； Server domain name：the domain name that analyze server； User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS.； When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit.
  • Page 38 【Remote path】 ：the directory to upload file Remark：the user should have the authority to upload file to server firstly. 【ARSP】 Startup DDNS server to add devices and manage it in the DDNS server Pic: 4.24 ARSP setting 【type】 ：choose DNS 【Enable】...
  • Page 39 Pic: 4.25 Alarm center setting 【Protocol】protocol type is GENERAL； 【Enable】tick means chosen, setting is valid only when it is enalbe 【Server IP】IP address of Alarm Server； 【Port No】Port No. of device 【Alarm report】tick means chosen, report alarm information to server 【Log report】tick means chosen, report log information to server 【Mobile monitor setting】...
  • Page 40 【Port】port no for mobile monitor, which you need to make a router mapping of if want to visit it by mobile 【UPNP】 UPNP protocol can auto port forwarding on router,make sure UPNP is enable on router before use Pic 4.27 UPNP setting 【Enable】tick ，open UPNP function，setting is valid only when it is enable means chosen...
  • Page 41 Pic: 4.28 GUI display 【Channel Name】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. 【Time title】tick ； means chosen, to shows the system time on monitoring page 【channel title】tick means chosen, show channel No at monitoring page.
  • Page 42 【 Region Cover 】 tick ， choose region cover quantity, then click setting ，enter related channel, user can use mouse to choose any size of cover region, (the covered region, video output should be in black) 【Time title】与【Channel title】set time title and channel title whether need be show out and the position to show.
  • Page 43 Pic: 4.30 Channel and time title setting 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 44 4.4.6 RS232 Pic: 4.31 RS232 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options； 【Parity】Include odd, even, mark, space.。 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 45 4.4.7 Camera parameter Pic: 4.32 camera parameter 【Expose】can choose automatic（0.1 milisecond-80 millisecond）, or manual （ 1/25，1/50，1/120， 1/250，1/500，1/1000，1/2000，1/4000，1/10000） ，default is automatic 【Day/night mode】can choose auto/color/ black and white, default is auto； 【Backlight compensation】can choose on or off； 【auto iris】can choose on or off； 【Porfile】can choose indoor or outdoor or auto, default is auto 【AE reference】can choose integers data between 0—100, default is 50；...
  • Page 46 ，means enable the convert of up and down of monitoring page. 【Anti-flicker】tick ，enable anti-flicker to the fluorescent light. 【Front-end Command】fill in command and send out, front end of IP camera will carry out this command 4.5 Advanced Advanced menu including：HDD manage、Account、Auto Maintain、Default、Import & Export、...
  • Page 47 Pic: 4.33 HDD manage 4.5.2 Account Manage the user authority of this device Remark：1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid.The middle blank in the character string is valid. Legal characters include: letter, number, underline, subtraction sign, dot.
  • Page 48 Pic: 4.34 Account 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid, Note：The user who possess the user control authority can modify its own or other users password Pic: 4.35 Modify password...
  • Page 49 【Add user】Add a user in the team and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team.
  • Page 50 Pic: 4.37 add group 【Delete user】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic: 4.38 delete group 4.5.3 Auto-maintain The user can set the auto reboot time and auto file deleting time limit. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 51 Pic: 4.39 auto maintain 4.5.4 Default The system restore to the default setup. You can choose the items according to the menu.） 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 52 Pic: 4.40 default 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...

  • Page 53: Device Info

    Pic: 4.41 system upgrade 【upgrade file】to select upgrade file via IE or client software to do upgrading. 4.5.6 Reboot To do soft reboot of IP camera 4.6 Device info Shows information of device, including：HDD info、Log , Version 4.6.1 HDD Info Display the hard disk state: type, overall capability, residual capability, the recording time and so on.。...
  • Page 54 Pic: 4.42 HDD info Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one.
  • Page 55 Pic: 4.43 Log info 4.6.3 Version Display the basic information such as hardware information, firmware version, built date, serial Number, and so on. 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...
  • Page 56 Pic: 4.44 version info 12000 Ford Road, Suite 110 Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com...

Table of Contents