Cisco UCS B22 M3 User Manual page 19

Table 10 Supported Adapter
Fabric
Extender Adapter Slot 1 Adapter Slot 2
Compatibility
2204XP (PIDs UCS-IOM-2204XP, UCS-IOM2204-8FET)
2204XP None
2204XP VIC 1240
2204 XP VIC 1240
2204XP VIC 1240
2204XP VIC 1240
2104XP (PID N20-I6584)
2104XP VIC 1240
Notes
1. In the server BIOS and on the motherboard, "Adapter 1" and "Adapter 2" are labeled as "mLOM" and "Mezz 1,"
respectively
2. Specifically, the UCSB-MEZ-QLG-03 (QLogic) or UCSB-MEZ-ELX-03 (Emulex) adapter
Also see Network Connectivity on page 41
To help ensure that your operating system is compatible with the adapters you have selected,
please check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
Caveats
If a VIC 1240 adapter is not installed (2-CPU configuration only), you must choose a Cisco,
■
Emulex, or QLogic I/O adapter to be installed in adapter 2 slot (see also
Connectivity on page
The mezzanine adapters are not supported for 1-CPU configurations. You must have two
■
CPUs installed before you can install and use mezzanine adapters.
The 1-CPU server configuration must always have a VIC 1240 installed in the adapter 1 slot.
■
Cisco UCS B22 M3 Blade Server
1
Combinations Options (2-CPU Configuration) (continued)
Emulex or QLogic I/O adapter
None
Cisco UCS Storage Accelerator
Emulex or QLogic I/O adapter
VIC 1280
Cisco UCS Storage Accelerator
(only)
41)
Ports
2 x 10 Gb
2
2 x 10 Gb
2 x 10 Gb
4 x 10 Gb
2
4 x 10 Gb
2 x 10 Gb
for more information.
CONFIGURING the SERVER
Reference
Figure 19 on page 49
Figure 20 on page 50
Figure 21 on page 50
Figure 22 on page 51
Figure 23 on page 51
Figure 24 on page 52
Network
19