Call Alert; Answering A Page; Initiating A Page - E.F. Johnson Company 5100 Series Operating Manual

•
If your transceiver does not have the proper
encryption key, "KEYFAIL" is displayed and the
call must be made in the clear mode (use the Clear/
Secure option key or menu parameter).
4. When the telephone call is finished or if it could not
be completed for some reason, end it by pressing the
Phone option key or F1 (Exit) key.
Receiving a Telephone Call
1. When a telephone call is received, "ringing" similar
to a standard telephone is heard and "PHONE" is
displayed.
2. To answer the call, press the Phone option key or
select that menu parameter and press the PTT switch
to talk and release it to listen. Since the transceiver
operates half duplex, it is not possible to talk and
listen at the same time.
3. When the call is finished, end it by pressing the
PHONE option key or F1 (Exit) key.

Call Alert

The call alert feature allows pages to be sent and
received. Your transceiver may be programmed to
answer pages in the Enhanced Private Conversation or
Private Conversation II modes. The operation differ-
ences are noted in the procedure which follows.

Answering a Page

1. When a page is received, four beeps sound and
"PAGE" is displayed. The ID of the mobile paging
you is stored as the last ID received.
2. To clear or ignore the page, press any option key. If
the PTT switch is pressed, a group call is placed on
the selected channel.
3. To answer the page as a private call (see page 24),
press the Private Call option key or select that menu
parameter and the alias of the mobile paging you is
displayed. Press the PTT switch and respond. One of
the conditions that follow may also occur:
SMARTNET/SMARTZONE FEATURES
Enhanced Private Conversation Mode
•
If the mobile being called is on the air, ringing is
heard until the called party answers or for 20
seconds, whichever occurs first. If no answer
occurs within 20 seconds, "NO ANS" is displayed.
•
If the mobile being called is not on the air, no
ringing is heard and "NO ACK" is displayed.
Private Conversation II Mode
•
If the mobile being called is not on the air or does
not answer, you will simply not hear a response.
4. When the call is finished or it could not be
completed for some reason, end it by pressing the
Private Call option key or the F1 (Exit) key.

Initiating a Page

1. With a SMARTNET/SmartZone channel selected,
momentarily press the Call Alert option key or
select that menu parameter. The alias of the last ID
called is displayed.
2. If required, press the Up/Down switch to display the
desired mobile. The alias of each number is
displayed.
3. Press the PTT switch and one of the following
occur:
•
If a continuous tone sounds, the system received
the page but the called mobile is not on the air. Try
again later or cancel the page by pressing the Call
Alert key again or the F1 (Exit) key.
•
If the called mobile does not answer within 6
seconds, a continuous tone sounds and "NO ACK"
is displayed. Try again later or cancel the page by
pressing the Call Alert key again or the F1 (Exit)
key.
•
If five beeps sound, the system received the page
and the paged mobile is on the air and received it.
The page mode is automatically exited.
27
May 2002
Part No. 002-5100-100