Cisco UCS B200 M3 Installation Manual page 14

d) Replace the server in the chassis and power on the blade by pressing the Power button.
Figure 10: Location of the Motherboard CMOS Battery
CPU and Heatsink Replacement
Special Information For Upgrades to Intel E5-2600 v2 Series CPUs
You must upgrade your server firmware to the required minimum level before you upgrade to Intel E5-2600
Caution
v2 Series CPUs. Older firmware versions cannot recognize the new CPUs and this results in a non-bootable
server.
The minimum software and firmware versions required for the server to support Intel E5-2600 v2 Series CPUs are as follows:
Table 2: Minimum Requirements For Intel E5-2600 v2 Series CPUs
Software or Firmware
14
Minimum Version