Table of Contents
Advertisement
C. Connecting the Docking Station to Computer
1. Assemble the docking station by sliding the main body onto the base plate to
make it self-standing.
2. Plug the power cord of the power adaptor into the Power jack on the back of
the docking station and then connect the power adapter to a working electrical
outlet.
The Power indicator on the front panel glows when the docking station is
powered on.
3. Plug the square end of the USB cable into the USB upstream connector at the
back of the docking station.
4. Plug the other end of the USB cable into an available USB 2.0 port on your
computer.
Once the Docking Station is connected, your computer will automatically complete
the remaining installation, including installing Windows built-in drivers for the USB
hub.
A pop-up message will appear in the notification area indicating the installation
status. Wait for the final message indicating the driver software installation is
successful. Then the docking station is ready for use.
11
Advertisement
Table of Contents
