■ Content Content ..........................1 1.Introduction ......................2 2.System Requirements ..................2 3.Specifications/Features ..................3 4.Installation ........................4 5.Removal ........................7 6.Driver Installation ....................9 Windows ME/2000/XP/VISTA ................9 Windows 98SE......................9 Mac OS 9.0 or later ....................10 Mac OS 8.6 ......................10 7.
1.Introduction The Vantec NexStar Hard Drive Dock is a complete and easy way to add or swap hard drives to your computer. It gives you the flexibility of connecting any SATA I/II hard drive to your computer via USB 2.0 or eSATA connection without opening up your computer case or installing into an enclosure.
3.Specifications/Features Features : Package Includes : ■ NexStar Hard Drive Dock ■ Install And Access Hard Drive in Seconds. ■ USB Cable ■ Simple to Use Design; No Need to Add Enclosure or ■ eSATA Cable Open Case. ■ Eject Button for Easy Removal of Hard Drive.
4.Installation 1. Connect the power adapter to the NexStar Hard Drive Dock. 2. Connect the USB or eSATA Cable to the NexStar Hard Drive Dock and attach the other end to your computer. Power Cable eSATA Cable USB 2.0 Cable...
Page 6
3. Insert 2.5” or 3.5” SATA HDD into the slot.
Page 7
3-1. When the eject button is upright, the NexStar Hard Drive Dock is ready for use.
5.Removal Warning, please push power button & turn off unit before removing the hard drive! 1. Remove the HDD safely from your computer system. 2. Push down the button to eject the HDD. (Stablize the HDD with your hand).
Page 9
3. Remove the HDD from the Hard Drive Dock.
My Computer, be sure to partition your hard drive. Windows 98SE 1. The first time you plug in the NexStar Hard Drive Dock into a USB port of your computer, the [Add New Hardware Wizard] dialog box will appear.
USB Mass Storage Support 1.3.5 from the Apple Software Updates website: http://www.apple.com/support. 3. Follow the direction associated with the USB Mass Storage Support driver to install. 4. Repeat the steps listed under “Connecting the NexStar Hard Drive Dock to your computer”.
7. Warranty The NexStar Hard Drive Dock comes with a 1 year limited warranty (90 day parts). If your unit become defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty.
Need help?
Do you have a question about the VANTEC NST-D100SU and is the answer not in the manual?
Questions and answers