Before attempting to connect, operate or adjust this product, please save and read the User’s Manual completely. The style of the product shown in this User’s Manual may be different from the actual unit due to various models. Safety Instructions Always read the safety instructions carefully: ◆...
Table of Contents Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 Class B of the FCC Rules. The operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received and include interference that may cause undesired operation.
Introduction The Vantec USB-C MST Docking Station with PD 60W is designed for extra connectivity demands. With the USB-C dock, you can extend the connection of a computer to more USB peripherals, Ethernet network, the speaker and the microphone via USB-C interface.
Features ◆ USB-C Input - USB Type-C female connector - Upstream PD powered, supports up to 60W - Supports VESA USB Type-C DisplayPort Alt mode ◆ Downstream Output - USB 3.0 Type-A female x3 (One port supports BC 1.2 & CDP) - USB 3.0 Type-C female x1 ◆...
Package Contents ◆ USB-C MST PD Dock ◆ USB-C Cable ◆ Power Adapter ◆ User’s Manual System Requirements ◆ PC with USB-C interface supporting VESA USB Type-C DisplayPort Alt Mode ◆ Supported Operating System - Windows® 10...
Product Overview Front Item Description 1. USB 3.0 Port Connect to USB 3.0 devices With BC 1.2 charging 2. USB-C Port Connect to USB-C devices 3. Combo Audio Jack Connect to a headset 4. Power Button Switch to power on/off...
Page 9
Product Overview Rear Item Description 5. Power jack Connect to the power adapter 6. USB-C Port Connect to the USB-C port of a computer 7. DP connector Connect to a DP monitor 8. HDMI connector Connect to a HDMI monitor 9.
Display conf iguration NOTE : The screenshots might vary slightly with the operating system. Multi-monitor conf iguration Once the extra monitors are connected, they can be conf igured to either Mirror mode, Extend mode or set the primary display. Position the mouse anywhere on the Windows Desktop, Right-click and select Screen Resolution.
Extend mode 1. Refer to the Multi-monitor conf iguration section to bring up the conf iguration window. 2. In the Display drop-down menu, select the preferred monitor. 3. Select Multiple Displays > Extend these displays. 4. Click OK to conf irm and exit. 5.
6. Troubleshooting a. Cursor disappeared If the status remains in the extended mode but the docking station is disconnected, the desktop will still be panned to the add-on monitor. The cursor may not be found on the primary monitor in such a case. If it happens, connect the add-on monitor through the docking station again or keep moving the mouse.
Set the primary monitor 1. Refer to the Multi-monitor conf iguration section to bring up the conf iguration window. 2. In the Display drop-down menu, select the preferred monitor. 3. Check the box of Make this my main display. NOTE: For some computers, you may need to disable the main display by unchecking the box of Extend the desktop onto this monitor or Extend my...
Audio conf iguration By default, when the docking station is connected to a computer, the audio conf iguration may be changed to USB (Multimedia) Audio Device automatically (this setting depends on models). If it does not work, follow the steps below to setup. 1.
Specif ication User Interface Upstream USB-C female connector Downstream DP female connector x1 HDMI female connector x1 USB 3.0 female connector x4 (3A1C), one port supports BC 1.2/CDP RJ45 connector x1 Combo Audio Jack (IN/OUT) x1 Video Resolution Single display, either one –...
Technical Support Thank you for purchasing Vantec products. We truly hope this product will help you and we look forward to providing you with the support for this product. If you have any technical or application issues about our products, please contact us through Vantec Website at : http://www.vantecusa.com...