Maintenance And Care; Metal Grease Filter; Open The Metal Grease Filter - AEG 2060 D Operating And Installation Manual

Maintenance and care

• The hood must always be disconnected from the mains power
supply before beginning any maintenance work.

Metal grease filter

• The purpose of the grease filters is to aspirate grease particles
which form during cooking and it must always be used, either in the
external evacuation or internal recycling function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.

Open the metal grease filter

• Pull the spring-lock and extract the grease filter. Fig. 3.
Hand washing
Soak grease filters for about one hour
in hot water with a grease-loosening
cleaner, then rinse off thoroughly with
hot water. Repeat the process if
necessary. Refit the grease filters
when it are dry.
Dishwasher machine
Place grease filters in dish washer.
Select most powerful washing
programme and highest temperature,
at least 65°C. Repeat the process.
Refit the grease filters when it are dry.
When washing the metal grease filter
in the dishwasher a slight
discoloration of the filter can occur,
this does not have any impact on its
performance.
• Clean the inner housing using a hot detergent solution only
(never use caustic detergents, abrasive powders or brushes).
Fig. 3
57