Specifications - Ryobi EMS-1422L Owner's Operating Manual

ADDITIONAL SAFETY RULES
LASER BEAM SAFETY INSTRUCTIONS
■ Do not look into the laser beam.
■ Do not point the laser beam at people or animals.
■ Do not use the laser beam on highly reflective
materials.
■ Reflected laser light can be dangerous.
■ Do not touch the Laser lens with hard objects.
■ Clean the laser lens with a soft, dry brush.
The following hazards may rise in connection
with tool's construction and design.
■ Contact with the blade.
■ Kickback of work piece and parts of work piece.
■ Blade fracture
■ Catapulting of blade pieces.
■ Damage to hearing if effective ear defenders are not
worn.
■ Harmful emissions of sawdust when the machine is
used in closed rooms. Always use supplementary dust
extraction where possible.

SPECIFICATIONS

Voltage
Power
Blade diameter
Bore diameter
No load speed
Cutting capacity mitre 0 °, bevel 0° - 120 x 50mm
mitre 0°, bevel 45° - 120 x 22mm
mitre 45°, bevel 0° - 85 x 50mm
mitre 45°, bevel 45° - 85 x 22mm
Weight
This tool is double insulated.
OPTIONAL LASER SYSTEM
Class
Output
Power supply
EMS-1422Lmanual (SAA).indd Sec1:8 EMS-1422Lmanual (SAA).indd Sec1:8
Fig.1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. MITRE LOCK LEVER
11. DUST BAG
12. UPPER BLADE GUARD
13 SPANNER
14. HEX WRENCH
15. SLEEVE WRENCH
16. SAW BLADE
17. TRIGGER SWITCH BUTTON
18. BEVEL SCALE
19. 0
20. BEVEL LOCK LEVER
21. FRONT END BLADE BOLT COVER
240V
22. ARBOR BOLT
1400 W
23. ALLEN SCREW
210mm x 2.8mm, 24T
24. BLADE BOLT COVER SCREW
16mm
25. LASER
5000 /min
26.
27. LASER ALIGNMENT SCREW
28. LIVE TOOL INDICATOR
29. REAR ANTI-TIP
30. EXTENSION ARM
7.5 kg
2
< 1 mW
3 V
8
DESCRIPTION
HANDLE
LOWER GUARD SAFETY LOCK
LOWER BLADE GUARD
LOCK DOWN PIN
MITRE TABLE
MITRE SCALE
TABLE INSERT
BASE
REAR FENCE
o
ALLEN SCREW STOPPER
LASER ON/OFF SWITCH
KNOW YOUR MITRE SAW
■ LOCK DOWN PIN (4)
Lock down pin is for easier transportation. To unlock
the head push down on the head, then pull the pin out
and raise the saw arm to the upright position. (fig. 4)
■ MITRE ADJUSTMENT
This mitre saw can do mitre cut from 0° to 45°, with
automatic locking of the index stopper at 5°. Rotate
mitre lock lever (10) and move the mitre table to the
desired cutting angle and then lock the mitre table.
(fig.5)
1/8/08 10:53:24 AM 1/8/08 10:53:24 AM