Do you have a question about the EMS-1221 and is the answer not in the manual?
Questions and answers
Satinder Singh Samra
February 25, 2025
How to adjust the blade for straight cutting?
1 comments:
Mr. Anderson
February 25, 2025
To adjust the blade on a Ryobi EMS-1221 for straight cutting:
1. Switch off the tool and unplug the power cord. 2. Set the vertical bevel cut: - Release the lock lever (19). - Use handle (14) to turn the bench (3) left or right until the mark aligns with 90°. 3. Set the horizontal bevel cut: - Slacken off lock (18) on the back of the tool. - Swing the saw head horizontally until it aligns at 90°. - Retighten the lock.
This ensures the blade is positioned for a straight cut.
Page 3
115 x 45 mm 0/90 115 x 22 mm 0/90 80 x 40 mm 80 x 22 mm Fig.4 Fig.5 Fig.6 Fig.7 EMS-1221 manual(SAA).indd A4 EMS-1221 manual(SAA).indd A4 8/6/07 2:17:05 PM 8/6/07 2:17:05 PM...
THANK YOU FOR BUYING A RYOBI PRODUCT. INSTRUCTIONS FOR SAFE HANDLING USE: To ensure your safety and satisfaction, carefully read this OWNER’S MANUAL and the SAFETY INSTRUCTIONS Stationary, precise cutting of wood and wood- product of before using this product.
Warning: Use the saw blades supplied only for ■ Have your electric power tool repair by an electrical wood and wood products! specialist. EMS-1221 manual(SAA).indd Sec1:5 EMS-1221 manual(SAA).indd Sec1:5 8/6/07 2:17:09 PM 8/6/07 2:17:09 PM...
Slacken off lock (18) on back of tool. Swing saw head horizontally to desired cut angle. Retighten lock. Note: Capacity of bevel can be changed from 45~90/0 degree to 45~-10 degree by adjusting the bevel cut adjuster(6). EMS-1221 manual(SAA).indd Sec1:6 EMS-1221 manual(SAA).indd Sec1:6 8/6/07 2:17:10 PM 8/6/07 2:17:10 PM...
Need help?
Do you have a question about the EMS-1221 and is the answer not in the manual?
Questions and answers
How to adjust the blade for straight cutting?
To adjust the blade on a Ryobi EMS-1221 for straight cutting:
1. Switch off the tool and unplug the power cord.
2. Set the vertical bevel cut:
- Release the lock lever (19).
- Use handle (14) to turn the bench (3) left or right until the mark aligns with 90°.
3. Set the horizontal bevel cut:
- Slacken off lock (18) on the back of the tool.
- Swing the saw head horizontally until it aligns at 90°.
- Retighten the lock.
This ensures the blade is positioned for a straight cut.
This answer is automatically generated