Options; Delay Start - Electrolux EWT 1466 HDW User Manual

Pro-
grammes
Standard 40
°C cotton
The information given in the chart above are in compliance with the EU Commis-
sion regulation 2015/2010 implementing directive 2009/125/EC.
1) At the end of spin phase.

6. OPTIONS

6.1 Temperature
Set this option to change the default tem-
perature.
Indicator
The display shows the set temperature.
6.2 Spin
With this option you can decrease the de-
fault spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin pha-
ses.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
Load Energy
(Kg) consump-
tion (kWh)
3 0.42
Off Mode (W)
0.50
= cold water.
Water con- Approxi-
sumption mate pro-
(litre) gramme
duration
(minutes)
33
Left On Mode (W)
0.50
• The display shows the indicator
To drain the water refer to 'At the
end of the programme'.
Extra Silent
• Set this option to remove all spin pha-
ses and to perform a silent washing.
• The rinse phase uses more water for
some washing programmes.
• The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
To drain the water refer to 'At the
end of the programme'.
6.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.

6.4 Delay Start

With this option you can delay the start of
a programme from 30 minutes to 20
hours.
ENGLISH
Remain-
ing mois-
ture (%)
129 52
.
9
1)
.