Table of Contents
Advertisement
Programmes
Standard 40 °C
cotton
1) At the end of spin phase.
The information given in the chart above are in compliance with the EU Commission
regulation 1015/2010 implementing directive 2009/125/EC.
7. OPTIONS
7.1 Temperature
Set this option to change the default
temperature.
Indicator
The display shows the set temperature.
7.2 Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
Load
Energy
(kg)
consump-
tion (kWh)
3.5
Off Mode (W)
0,48
= cold water.
Water con-
sumption
(litre)
0.55
42
Left On Mode (W)
To drain the water refer to 'At
the end of the programme'.
Extra Silent
• Set this option to remove all spin
phases and to perform a silent
washing.
• The rinse phase uses more water for
some washing programmes.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
To drain the water refer to 'At
the end of the programme'.
7.3 Prewash
With this option you can add a prewash
.
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
.
ENGLISH
Approxi-
Remaining
mate pro-
moisture
gramme
1)
(%)
duration
(minutes)
176
53
0,48
11
.
Advertisement
Table of Contents
