Table of Contents
Advertisement
• ... the cleaning program cannot be
started?
– Turn the bean container to the pow-
der setting, then start the cleaning
program.
• ... "Descale" key (Fig. 3, j)
flashing?
– Number of coffees dispensed
necessitates descaling: Carry out
descaling: see „Running the
Descaling Program" page 43.
• ... the espresso/coffee is not hot
enough?
– Preheat the cups with hot water.
– Increase coffee temperature; see
„Setting the Coffee Temperature"
page 38.
• ... the espresso/coffee is too weak?
– Not enough ground coffee. Increase
the amount of ground coffee, max. 2
measuring spoons.
– The coffee bean container is empty.
Add coffee beans.
– The coffee quantity is set too low.
Increase the coffee quantity, see
„Changing and Saving the Coffee
Quantity" page 38.
– The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture" page 38.
• ...the crema is too weak?
– Use fresh water.
– Use fresh beans or fresh coffee
powder.
– Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit",
page 41.
• ...milk is not frothy enough?
– The milk is too hot or too old or the
fat content is too high. Use suitable
milk.
– Blocked steam nozzle. Clean the
steam nozzle, see page 37.
– The air intake in the frothing aid is
blocked. Clean the frothing aid, see
page 37.
• ... the bean container will not locate
on the grinder?
– Coffee bean residue on or around
is
– Coffee bean residue is jammed in the
• ... the grinder makes very loud noises
when grinding?
– The grinder is blocked by a foreign
– You can continue to use your coffee
• ... the coffee-making unit will not
come out?
– The coffee-making unit is not in the
• ... the coffee-making unit will not fit
back in?
– The coffee-making unit is not closed.
– The latching lever is not up. Push the
the grinder: Remove coffee bean
residue from the grinder, see
page 41.
bean container lock. Clear the bean
container lock of coffee bean residue.
body. Remove the foreign body as
described in this manual, refer to
„Cleaning the Grinder" page 41. If
necessary, have the coffee machine
checked by the Customer Service
Centre.
machine with ground coffee.
base position.
– Re-assemble the appliance and
switch on.
– Now switch the appliance off
again in the normal way. The
coffee-making unit runs to the
base position.
– Remove the coffee-making unit,
refer to „Cleaning the Coffee-
making Unit", page 41.
Turn the service lever to close the
coffee-making unit.
metal clip up, and insert the coffee-
making unit, see page 42.
g
45
Advertisement
Table of Contents
