Calibrating The Screen - Husqvarna Platinum 3000 Owner's Manual

Calibrating the Screen

If your screen needs to be calibrated because when you touch it nothing happens take the following
steps.
1. Place the USB stick into your computer.
2. Go to www.husqvarnaviking.com.
3. Select Quilting, Platinum
4. On the right side menu select "Calibrating Your Screen"
5. Download file reset.cal to the USB stick.
6. Safely remove the USB stick from your computer after the file has downloaded.
7. Power on the quilting machine.
8. Plug the USB stick into the USB port located on the left side of the LCD screen (fig. 51).
9. The quilting machine will begin to read the file and it will start the calibration.
10. Follow the instructions on your screen to calibrate your screen.
11. The quilting machine will restart, once the machine has booted
back up the screen will be calibrated.
12. Once the calibration is complete the file reset.cal will
automatically be removed from the USB stick.
28
3000.
TM
Fig. 51
USB Port