Diagnostics - Husqvarna Platinum 3000 Owner's Manual

Diagnostics

The Diagnostics screen allows you to check some of the electronics
and functions to ensure they are working.
Needle Sensor
When you press the needle up button or needle down button the needle
sensor detects the proper position for stopping in right location.
Motor Encoder
When you touch this button it displays a number as you turn the hand
wheel on the back of the machine. This number will change, providing
information to a service technician.
Motor Settings
When you touch this button it brings up a key pad so that a password can
be entered to make changes to the Motor settings. This will be under the
direction of a service technician .
Temperature
Indicates the temperature of the motor.
Top Encoder
When you touch this button, it changes to green and shows you where
the encoder is positioned. When you move your machine front to back the
number should change. The changing number indicates that the machine
is getting the signal from the encoder.
Bottom Encoder
When you touch this button, it changes to green and shows you where
the encoder is positioned. When you move the machine left to right the
number should change. The changing number indicates that the machine
is getting the signal from the encoder.
CAUTION! The following function are for
Use with a Service Technician
17