Table of Contents
Advertisement
What to do if ...
Symptom
The oven does not heat
up.
Pyroluxe is not working
The oven door is locked Appliance is not connected
The oven lighting does
not come on.
If you are unable to remedy the fault with the above assistance,
please contact your specialist dealer or AEG Service Force Centre.
Warning: Repairs to the applicance may only be carried out by ap-
1
proved service engineers! Repairs carried out by inexperienced persons
may cause serious injury to the user.
If the appliance has been used improperly, the customer service engi-
neer's visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
Due to the cold front of your appliance, the inner door glass may steam
3
over briefly if you open the door during or shortly after roasting or
baking.
Possible cause
The oven has not been
switched on.
The time has not been set.
The necessary settings have
not been made.
The oven safety cut-out has
been triggered.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven shelf runner has
not been removed
to the mains; door lock has
been activated.
The oven light bulb is faulty.
Remedy
Switch on the oven.
Set the time.
Check the settings.
See
Safety Cut-out.
Check the circuit breaker or
fuse.
If the circuit breaker trips or
the fuse blows several times,
please contact an approved
electrician.
Remove the oven shelf run-
ner
Connect the appliance and
wait at least 10 seconds until
the red indicator goes out.
Change the oven light bulb
(see Cleaning and Care).
53
Advertisement
Table of Contents
