Related Manuals for Ryobi ERH750VN
Summary of Contents for Ryobi ERH750VN
- Page 1 ERH750VN ROTARY HAMMER DRILL OWNER'S OPERATING MANUAL ROTARY HAMMER DRILL rotary hammer drill dependability, trouble free rotary hammer drill rotary hammer drill reliable service.
-
Page 2: Rules For Safe Operation
RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to possible 10. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses dangers. The safety symbols and the explanations with them, have only impact resistant lenses, they are not safety glasses. require your careful attention and understanding. - Page 3 Fig.1 Fig.2 Fig.3 Fig.4 Fig.5...
- Page 4 ERH750VN Fig.6...
-
Page 5: Description (Fig. 1)
If incorrectly fitted, chisel bits and drill bits may be PRODUCT SPECIFICATIONS flung out of the tool accidentally and cause serious injury. Before you start using your rotary hammer ERH750VN drill, always check that the chisel or drill bit is Voltage 240V 50 Hz properly locked in the chuck. - Page 6 When using the tool, always hold it with both hands when it is fitted with the auxiliary handle. and ensure that you have stable footing. Chisels may only be used with ERH750VN with Roto- To loosen the auxiliary handle, rotate the handle stop engaged.
-
Page 7: Reversing The Direction Of Rotation
When hammer drilling, you do not need to force condition. the drill. Too much pressure will place It is recommended that you take this tool to a Ryobi unnecessary load on the motor. Check the drill Authorized Service Centre for a through cleaning and bits regularly. - Page 8 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.