English GENERAL SAFETY RULES PERSONAL SAFETY Stay alert, watch what you are doing and use ■ common sense when operating a power tool. Do WARNING not use a power tool while you are tired or under Read all safety warnings and all instructions. the influence of drugs, alcohol or medication.
SPECIFICATIONS tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by EID1050RB poorly maintained power tools. Voltage 240 V 50 Hz Keep cutting tools sharp and clean.
Page 7
English OPERATION drill and hole. When the reverse selector is pushed in, the bit rotates ■ AUXILIARY HANDLE AND DEPTH GAUGE counterclockwise. See Figure 6. Auxiliary handle MOUNTING AND REMOVING THE BIT See Figure 4. The auxiliary handle (8) can be rotated 360º. Insert the drill bit (9) into the chuck as far as the plain Loosen the handle grip by turning in direction (15), ■...
After use, check the tool to make sure that it is in good condition. It is recommended that you take this tool to a RYOBI Authorised Service Center for a thorough cleaning and lubrication at least once a year. DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS IN MOTION.