Uninstalling The Usb Driver (Windows); Faq's - Globalsat USB GPS Dongle ND-100 User Manual

Usb gps dongle

Hide thumbs Also See for USB GPS Dongle ND-100:

Table of Contents

NOTE: Configuration (or selection) of an assigned COM port for the GPS device from within your

mapping or charting software must be completed whenever using the software for the first time.

6. UNINSTALLING THE USB DRIVER (Windows)

To uninstall the ND-100 driver, click the Windows START button >>PROGRAMS>>PL-2303 USB-

Serial Driver and select UNINSTALLER from the menu.

I am not getting GPS data into my application.

1. Check your DEVICE MANAGER to confirm the COM Port number assigned to the GPS

Receiver (it will be listed under the PORTS (COM & LPT) heading as Prolific

Comm.

Then be sure this is the same COM port number configured in your application.

2. Be sure your Baud rate is configured correctly at:

Baud Rate: 38400

Data bit: 8

Parity: None

Stop Bit: 1

Flow Control: None

3. Re-boot your computer and then insert the USB GPS into a USB port.

4. Configure the MiniCDU utility with the correct COM Port and test your GPS receiver first

before using it in your application.

Will the ND-100 work with Street Map, Marine Chart or Aviation software?

Serial-to-USB

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the USB GPS Dongle ND-100 and is the answer not in the manual?