Advertisement
16
Troubleshooting
The vacuum cleaner does not start
•
Check that the cable is connected to the mains.
Check that the plug and cable are not damaged.
•
Check for a blown fuse.
•
The vacuum cleaner stops
Check if Twinclean is full. If so, empty it and clean
•
both
the box and the filter before putting it back in the
cleaner.
Is the nozzle, tube or hose blocked?
•
Are the filters blocked?
•
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an
authorised Electrolux service centre. Damage to the
motor caused by the penetration of water is not
covered by the warranty.
Consumer information
Electrolux does not accept liability for defects arising
from neglect, misuse or accident. This product is
designed with the environment in mind and all plastic
parts are marked for recycling purposes. For further
information please visit our website: www.electrolux.
com
Advertisement
