Table of Contents
Advertisement
2
Disposal
Disposal of packaging material
•
All parts of the packaging can be fully recycled;
foil and expanded polyurethane parts are appro-
priately identified. Please dispose of packaging
material and, if appropriate, your old appliance
properly.
•
Please follow the national and regional regulations
and material identification (material separation,
refuse collection, waste disposal sites).
Description of appliance
Key features of your appliance
•
The highly conducting grill plate is 10 mm thick. It
consists of twin-layer stainless steel and therefore
has a good thermal capacity. This prevents a rapid
decrease in temperature, e.g. when preparing
meat from the refrigerator.
•
The channeld edge fulfils three important func-
tions:
– It reduces the temperature at the installation
surfaces so much that the grill plate can be fit-
ted in various kitchen working surfaces.
– The curvature of the channel absorbs the
expansion of the heated grill plate to keep it
flat.
– Minor food remnants and liquids can easily be
fed to the channel and removed.
Information on disposal
•
The appliance must not be disposed of with
household rubbish.
•
Information about collection dates or public refuse
disposal sites can be obtained from your local
refuse department or council.
•
Warning! Before disposing of old appliances make
them inoperable. Remove power cable.
•
The thermostat with readable temperature setting
ensures a constant temperature. This prevents
overheating of the food and permits low-fat cook-
ing with retention of nutritional value.
•
The food is prepared (heated) directly on the grill
plate with or without fat. It is also possible, how-
ever, to cook with pots.
•
The heating time, e.g. to 180 °C, is approx.
6–7 minutes.
The cooling time, e.g. from 180 °C to 100 °C, is
approx. 45 minutes, or to 60 °C approx.
60 minutes.
5
Advertisement
Table of Contents
