Box Contents - Dyson DCO7 Owner's Manual

Box contents

Wand
Hose
1
Stair tool
Brush tool
Assembling your DCO7
Crevice tool
This machine was inspected and
packaged carefully before being
shipped from the factory.
If you need assistance during
Animal turbo tool
assembly or operation, please
Supplied with certain
call the Dyson Helpline on
models only, or available
1 - 866 - 693 - 9766.
as an accessory.
1 Slide the hose into the guides
at the back of the machine,
pushing the tab securely into
place.
Floor tool
Supplied with certain
models only, or available
as an accessory.
1 - 866 - 693 - 9766
Dyson Helpline contact us on
4
2
3
2 Pressing the wand release 3 Slide the wand into the top
button, slide the wand down of the machine until it clicks
inside the hose. securely into place. You may
need to press firmly and
should hear a 'click' sound.
4 5
4 Push the brush and stair tools 5 Store the cord safely by
securely into the storage holes winding counter-clockwise
on either side of machine. around the cord winders and
Fit the crevice tool into the tool securing with the cord clip.
clip on the back of the wand.
5