Emptying The Clear Bin - Dyson DCO7 Owner's Manual

Emptying the
clear bin TM
A
CAUTION
• Disconnect the machine from
the electrical outlet before
emptying the bin. Failure to
do so could result in electric
shock or personal injury.
B
Clear bin emptying option 1
To ensure your machine continues Recommended for asthma/allergy
to clean effectively, the clear bin sufferers.
must be emptied when the dust
Wipe the outside of the clear bin
reaches the MAX mark.
with a damp cloth.
Press the cyclone release catch
A Place the bin inside a bag,
with your thumb to remove the
close the bag around the bin
clear bin assembly from the
and pull the trigger to release
machine.
dust. Shake or tap firmly to
remove all dust from inside
the fine dust collector.
B Let the dust settle, then press
firmly on the center of the bin
base to close before removing
from the bag. Seal the bag
carefully and replace the bin.
1 - 866 - 693 - 9766
Dyson Helpline contact us on
10
A A
B B
Clear bin emptying option 2 Shroud cleaning
(when necessary)
A Pull the trigger to release dust
directly into a garbage can or To remove any build-up of lint or
wastebasket. Shake or tap large dust particles on the shroud:
firmly to remove all dust from
Ensure the clear bin is empty
inside the fine dust collector.
and the clear bin base is open.
A Press the bin release catch to
remove the clear bin.
B Clean the shroud with a cloth
or dry brush to remove the
Fine dust collector
lint and dust.
CAUTION
• Do not use the machine
B Press firmly on the center of without the clear bin in place.
the clear bin base to close.
C
The British Allergy Foundation is a
UK national charity with the aim of
improving awareness, prevention
and treatment of allergies.
The British Allergy Foundation Seal
of Approval is a UK registered
trademark.
D
Clear bin cleaning
(optional)
To reassemble the clear bin,
place on the floor with the clear • You may rinse the clear bin
bin base closed. with water. Rinse only the
clear bin – do not rinse the
C Holding the carry handle, put
inner cyclone, shroud or cones.
the cyclone assembly inside the
clear bin, line up the front and
• Do not use detergents.
rear catches and push down
• Do not immerse any other
to click the catches into place.
part of the machine in water.
D Ensure the clear bin is
• Ensure the clear bin is
secure before replacing on
completely dry before
the machine.
replacing.
11